Door Making

Similar to the standard horizontal raised panel series but with new back cutters to cut the inside of the panel. Includes two different bearings to allow for safer two-pass operation. Use with router table only.

VERTICAL Raised Panels Bits designed for router tables only. Use routers with 1-1/2 horsepower minimum and make several passes for best finish, tool life and safety. Will not cut arched or curved shapes.

VERTICAL Raised Panels Bits designed for router tables only. Use routers with 1-1/2 horsepower minimum and make several passes for best finish, tool life and safety. Will not cut arched or curved shapes.

Mill the edges of doors and drawer fronts with this assembly, rounding the show edge and simultaneously forming a rabbet with a tapered shoulder on the back edge. Works on straight stock from 5/8 through 1 in thickness. Must be used in a table-mounted...

Use one tool for both cuts by reversing the assembly. Includes shims that give perfect alignment before and after sharpening. For best results, the rail cut should be done on a router table. With complete instructions.

These rail and stile sets give you two complete bits, one for doing the rail cuts, one for the stiles. Make cabinet doors and all varieties of frame-and-panel assemblies for furniture and architectural applications. The same three profiles are available...

440-16 Carbide Tipped Shaker Stile & Rail 2-Piece Set 22.5 Deg x 1-3/4 Dia x 15/16 x 1/2 Inch Shank with Ball Bearing for 3/4 to 15/16 Inch Material For 5/8"-7/8" Material2 Flute with Ball Bearing Guide