Vicmarc
Vicmarc V00411-3 Face Plate 100mm 1-1/4"x8
- SKU:
- V00411-3
- MPN:
- V00411-3
- Shipping:
- Calculated at Checkout
Frequently bought together:
Related Products
Vicmarc V00400 Face Plate Ring 70mm (2-3/4")
Vicmarc
$32.00
For VM90/100. These can be used instead of the traditional faceplate. They allow remounting of prepared blanks by mounting directly onto the chuck jaws. Also can be used for turning green wood that...
V00400
Vicmarc V00296-3 Eccentric chuck #4 1-1/4"x8tpi
Vicmarc
$295.95
The Eccentric Chuck #4 is designed and manufactured by Vicmarc Machinery and it expands the possibilities for off center turning. This version has a direct thread of 1-1/4"x8tpi.
The main feature of...
V00296-3
On Sale
Vicmarc V01258 3/4" to 1/2" Reduction Bushing
Vicmarc
Now:
$12.00
Was:
$16.95
3/4" OD Reduction Bushes are available in four sizes.
Hole Diameter
Part Number
6mm
V01256
9.5mm (3/8")
V01257
12.7mm (1/2")
V01258
V01258
Out of stock
Vicmarc V00653 VM100 Shark Jaws 48mm (1-3/4")
Vicmarc
$72.00
Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and...
V00653
Vicmarc VM120 Insert 1-1/4" x 8tpi
Vicmarc
$39.95
This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a 1-1/4" x 8tpi Spindle thread.
Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this...
V00568
On Sale
Vicmarc V01257 3/4" to 3/8" Reduction Bushing
Vicmarc
Now:
$12.00
Was:
$16.95
3/4" OD Reduction Bushes are available in four sizes.
Hole Diameter
Part Number
6mm
V01256
9.5mm (3/8")
V01257
12.7mm (1/2")
V01258
V01257
Vicmarc VM120 Insert 1" x 8tpi
Vicmarc
$39.95
This insert will adapt the Vicmarc VM120, VM140, and VM150 chucks to any lathe with a 1" x 8tpi Spindle thread.
Vicmarc's Eccentric chucks and the Vicmarc Oval Device also accept this insert
All...
V00581